• Custom shape feasibility
  • Drawing and liner review
  • Prototype acceptance planning

Cosmetic Patch Edge Quality and Defect Review

A ragged edge, residual connection or liner damage should each be described separately. A broad comment that a sample looks bad gives the supplier little to investigate.

Name the observed condition

Use a photo to show the location and note whether the concern is on the perimeter, in the neighboring web or on the carrier. Include a sample ID and position.

Compare pass examples from the agreed representative set. Material shape and flexibility can affect normal appearance, so a reference is more useful than a subjective adjective.

Identify the use consequence

Observe whether the issue affects peel, handling, placement or the pack. A minor visual difference and an interruption to release have different significance.

When inspection reveals a recurring location, identify the geometry feature or sheet position that repeats. Keep the causal conclusion open until evidence supports it.

Make the acceptance rule reproducible

Define how the candidate edge should be checked and which examples are permissible. Share approved reference samples or images with all parties.

When materials change, confirm whether the prior visual reference still applies. Old edge examples may not describe the appearance of a different backing.

Frequently asked questions

How should I report a loose scrap on a patch?

Identify where it was found, whether it remained attached and what happened during removal. Include a photo and matched sample reference.

References

Share this requirement with our team

Share the proposed outline, target areas, drawing revision and any prototype acceptance criteria.