• Custom shape feasibility
  • Drawing and liner review
  • Prototype acceptance planning

Assorted Patch Sheet Design and Count Checks

An assortment can improve choice but can also hide a missing or misoriented piece. Make the inspection plan as clear as the consumer-facing layout.

Create a position map

Give every slot a reference, such as a row and column or a small printed cue. Identify the part expected at that slot and mark optional positions explicitly.

For a pair, record the quantity of each hand. A correct total count can still hide a duplicate left piece and a missing right piece.

Review around the array

Open the packed sheet and remove candidate positions in more than one order. Record whether lifting a larger part makes a nearby smaller one difficult to access.

Compare what happens at the top and bottom of the carrier. A rotated sheet in the pack can substantially change the first accessible peel edge.

Define acceptance with an example

Keep an annotated approved sheet to help check appearance, orientation and position. Identify which count or positional errors require action.

Prepare a separate record for each assortment variant. Shared drawings and labels should show variant codes prominently enough to prevent a packing mix-up.

Frequently asked questions

Do I need a new drawing for a count change?

The underlying part drawings may stay the same, but an assortment layout needs its own current count and positions.

References

Share this requirement with our team

Share the proposed outline, target areas, drawing revision and any prototype acceptance criteria.