• Custom shape feasibility
  • Drawing and liner review
  • Prototype acceptance planning

Cosmetic Patch Pack Fit and Clearance

The part can meet its drawing while the sheet or tray still catches at the opening. Fit review needs the packed assembly and its real removal path.

Two translucent crescent eye patch samples inside an open clear carrier
Eye patch pair photographed in an open carrier from the product handbook.

Measure the useful opening

Review the inner space and usable opening separately from the outer pack dimensions. Identify any seal area, notch or lip constraining the way the carrier enters.

Compare the sheet's full envelope, including the liner pull tab. A corner that appears irrelevant on the drawing can contact the pack while opening.

Inspect after normal handling

Remove the part from a packed assembly and capture where it bends, catches or shifts. Consider the expected orientation after ordinary movement through shipping and handling.

Compare several representative units where feasible. The working clearance needs to absorb relevant variation in both carrier and container.

Decide which change solves the problem

A change to carrier aspect ratio, tab position or pack opening can improve fit without changing the cosmetic footprint. Document which dimension needs revision.

Recheck the linked drawing and the pack after a change. The revised idea should have an approved sample that can be tracked to the current configuration.

Frequently asked questions

Is the sachet size enough to approve fit?

It gives an envelope. Check usable opening, seal area and removal path with the actual carrier or tray.

References

Share this requirement with our team

Share the proposed outline, target areas, drawing revision and any prototype acceptance criteria.