• Custom shape feasibility
  • Drawing and liner review
  • Prototype acceptance planning

Map samples back to a multi-cavity die

When a sheet includes several copies of the same patch, a handful of loose samples loses information about where each piece came from. A simple position map helps a buyer tell a repeating defect from a one-off handling mark.

Mark the sheet before separating parts

Take a top-view picture with the feed direction visible. Label the rows and columns or use the identifiers supplied by the converter. Mark which side is viewed. If the supplier sends an inverted sheet as well, keep that photo under a different view label. Retain at least one intact example so the reviewer can reconstruct the original positions from the submission.

Compare locations across sheets

Record the edge or feature in question and the position where it occurs. Ask for examples from that position on other identified sheets and from neighboring positions on the same sheets. A repeated observation gives the supplier a focused starting point for inspection. Keep the original position labels on any pieces sent back for examination and record whether the return set is complete.

Frequently asked questions

What if the cavity numbers are hidden on the finished sheet?

Ask the converter for its layout and agree a fixed viewing orientation before assigning temporary sample positions.

References

Share this requirement with our team

Share the proposed outline, target areas, drawing revision and any prototype acceptance criteria.