Define the datum and offset
Choose the edge or mark that anchors each measurement. Specify offsets for the features that must stay clear of the cut or remain centered in a product zone.
Record horizontal and vertical displacement separately. A shifted layer and a rotated layer can appear similar near a corner but lead to different design decisions.
Review the boundaries
Overlay the proposed drawing layers. Find the area with the smallest clearance and use the sample review to confirm which misalignment would matter to use or packaging.
Inspect repeated positions within a representative set. A single polished photograph can show appearance while hiding how the offset changes from piece to piece.
Capture the release rule
Put the datum, measurement state and agreed tolerances on the same drawing revision. Use the inspection sheet to identify the actual laminate and sample batch.
If the print position changes while the cut stays the same, ask whether a comparative review is needed. The fixture reference may differ from the brand's visual target.
Frequently asked questions
Should the cut or artwork be the datum?
Choose the physical or printed reference that is reliably identifiable and best matches the functional requirement under review.