• Custom shape feasibility
  • Drawing and liner review
  • Prototype acceptance planning

First-Article Review for Cosmetic Patch Parts

A first-article review ties the physical sample to the drawing revision and the actual presentation agreed by the buying team.

Identify exactly what arrived

Record the sample ID, drawing revision and material stack reference. Confirm whether the lot represents a production-intent route or an evaluation build.

Keep the supplied parts labeled throughout review. Loose parts from two alternatives can look identical after they are removed from their carriers.

Inspect the functional details

Review the perimeter, cosmetic-zone position and liner separation alongside the inspection drawing. Record measured results or observation categories for the selected features.

Check the part as it appears in the package where feasible. Mark which findings follow from the shape, and which may depend on presentation.

Issue a decision with scope

Approve, request a revision or hold for additional evidence. List the exact sample and conditions approved so later changes are evaluated against the right baseline.

Send the marked measurements and photos with the decision. An ambiguous approval invites the same question to return when production is scheduled.

Frequently asked questions

Can an early mock-up serve as the first article?

Use a mock-up for its defined questions. First-article approval generally needs the representative configuration the buyer has agreed to review.

References

Share this requirement with our team

Share the proposed outline, target areas, drawing revision and any prototype acceptance criteria.