• Custom shape feasibility
  • Drawing and liner review
  • Prototype acceptance planning

Specify the unwind direction for roll-fed patch carriers

A packer receiving a roll needs to know which face comes off the roll and which end of the patch reaches the station first. A phrase such as left unwind can be read differently when the viewer stands on the other side of the equipment.

Show the roll in the intended view

Draw the core, an arrow for web travel and one recognizable patch outline. Label the product-facing side and mark the leading edge of a repeat. Add the orientation of the printed artwork if it determines the direction of reading. Attach a photo of the receiving station or an annotated sketch showing the observer's position relative to the roll.

Review the first usable length

Ask for a short identified sample wound in the proposed direction. Follow one patch from the roll to the pickup position and record whether its liner tab is accessible at that point. Confirm with the packing team how it handles splices and how changes of roll are identified. Keep the approved sketch and trial sample together when the pack order is released.

Frequently asked questions

What changes for a symmetrical circular patch?

The patch may look the same after rotation, while the liner slit, registration marks or printed text still determine the feed direction.

References

Share this requirement with our team

Share the proposed outline, target areas, drawing revision and any prototype acceptance criteria.